Search results for "water absorption"
showing 10 items of 12 documents
Synergistic effect of fiber content and length on mechanical and water absorption behaviors of Phoenix sp. fiber-reinforced epoxy composites
2016
Phoenix sp. fiber-reinforced epoxy composites have been manufactured using compression molding technique. The effect of reinforcement volume content (0%, 10%, 20%, 30%, 40%, and 50%) and size (300 µm particles, 10 mm, 20 mm, and 30 mm fibers) on quasi-static and dynamic mechanical properties was investigated. Moreover, the water absorption properties of composites were analyzed at different environmental conditions (10℃, 30℃, and 60℃). For each reinforcement size, composites loaded with 40% in volume show highest tensile and flexural properties. Furthermore, composites with 300 µm particles present the best impact properties and the lowest water absorption, regardless of the environmental …
X-ray CT imaging as a scientific tool to study the capillary water absorption in sedimentary rocks used in cultural heritages
2009
This paper proposes the X-Ray CT imaging as appropriate tool for investigating the capillary water absorption in sedimentary rocks. This technique, in fact, provides information useful for deeping the knowledge about of the porosity and the kinetics of the water capillary absorption in porous materials. The possibility to improve in non invasive manner, the understanding of this phenomenon, constitutes a fundamental aspect to take actions in the restoration and conservation of lapideous artifact and monuments from cultural heritages. The investigated sedimentary rocks come from different Sicilian quarries and were used for the building of the Greek temples in the archaeological areas of Agr…
The effects of water absorption and salt fog exposure on agglomerated cork compressive response
2022
The replacement of synthetic foams with agglomerated cork in sandwich composites can meet the increasing environmental concerns. Its peculiar morphology and chemical composition lead to outstanding dimensional recovery that endorsed a broad investigation of its compressive behavior. The knowledge of neat material response is fundamental to obtain a reliable design dataset, but it is necessary to consider all the environmental factors (water, moisture and sunlight) that significantly modify material mechanical properties. In view of this, the present work investigates the effect of distilled and seawater absorption and salt fog exposure on the compressive behavior of two agglomerated corks w…
Basalt Fibre Composite with Carbon Nanomodified Epoxy Matrix under Hydrothermal Ageing
2021
This work aimed to investigate the effect of hybrid carbon nanofillers (e.g., carbon nanotubes/carbon nanofibers in the ratio 1:1 by mass) over the electrical and flexural properties for an epoxy matrix and corresponding basalt fibre reinforcing composite (BFRC) subjected to full-year seasonal water absorption. Hydrothermal ageing was performed by full immersion of the tested materials into distilled water according to the following model conditions (seasons). The mechanical properties were measured in three-point bending mode before environmental ageing and after each season. Upon environmental ageing, the relative change of flexural strength and elastic modulus of the epoxy and NC was wit…
Noise reduction in magnetic resonance images by Wavelet transforms: an application to the study of capillary water absorption in sedimentary rocks
2007
Magnetic resonance imaging (MRI) is a powerful technique to study capillary water absorption kinetics in sedimentary rocks. However, the noise in the images can limit the correct identification and the quantitative measurement of the average height reached by the wetting front inside the porous material where imbibition occurs. Therefore, denoising methods can be applied to improve the image quality for a more accurate analysis, without the disadvantages of longer acquisition times. This study attempts to improve the signal-to-noise ratio of the images acquired by MRI on a sedimentary rock (Pietra di Lecce) using a waveletbased thresholding technique. The idea is to average some slightly di…
Hydrothermal ageing of polylactide/sisal biocomposites. Studies of water absorption behaviour and Physico-Chemical performance
2014
An accelerated hydrothermal degrading test was designed in order to analyse the synergic effect of water and temperature on PLA/sisal biocomposites with and without coupling agent. As well, the physicochemical properties of biocomposites were monitored along the hydrothermal test by means of Scanning Electron Microscopy, Size Exclusion Chromatography and Differential Scanning Calorimetry. The addition of fibre induced higher water absorption capability and promoted physical degradation, as observed in the surface topography. During the processing of biocomposites and throughout the hydrothermal ageing, a reduction of molecular weight due to chain scission was found. As a consequence, a fast…
Hygrothermal ageing of reprocessed polylactide
2012
[EN] The influence of an accelerated hygrothermal ageing simulation test on a commercial PLA and its three subsequent mechanically-reprocessed materials was studied. The analysis was focused on the water diffusion kinetics and the physico-chemical changes induced by the hygrothermal degradation. Water diffusion proceeded faster than chain relaxation processes, as defined by a Case II absorption model. It was proved that the water diffusion rate decreased with subsequent reprocessing cycles and increased with higher hygrothermal ageing temperatures. Hydrolytic chain scission provoked significant molar mass decays and consequent general losses of thermal and mechanical performance. The rearra…
Laboratory tests addressed to realize customized restoration procedures of underwater archaeological ceramic finds
2013
The present contribution is part of a biennial research project funded by the Italian Ministry of Education, Universities and Research (MIUR). This study, currently in progress, deals with innovative experimental approaches applied to the chemical, mineralogical and physical transformations occurring during the prolonged permanence of archaeological ceramic finds in seawater environments as well as to restoration and conservation issues of the same underwater artifacts. The experimental approach used in this research consisted in the manufacture of ceramic test-pieces (briquettes) and their successive placing in underwater environment. This work aims at assessing how textural and compositio…
Water Absorption of Hemp Fibre Nonwovens Modified with Metal and Metal Oxide Nanoparticles
2015
In this paper changes of ability of hemp fibre nonwovens to absorb water after deposition of metal and metal oxide nanoparticles were investigated. Moisture content of samples after storage in different climatic conditions was determined using thermogravimetric method. The obtained results were compared with the results of previous research based on investigation of water absorption of metalized woven fabric of bast fibre. Analysis of measurements showed that nonwoven samples with surface treated in plasma attract water slightly better than sample with untreated surface; this was more pronounced in woven fabric samples. In turn, metal coatings reduced water sorption. Unlike woven fabric sam…
Thermal and hygrometric properties of traditional calcarenite stones in the area of Palermo
2017
Il contributo espone le misure di conducibilità termica svolte su tre conci di calcarenite conchiliare e la caratterizzazione igrometrica di uno di essi. I risultati sono confrontati con i dati termici e igrometrici riportati dalle norme tecniche esistenti (UNI 10351, UNI EN ISO 10456, UNI EN 1745). The energy improvement of historic buildings requires detailed knowledge of the thermal and hygrometric properties of traditional materials and components. These data should be collected for specific local contexts, where the features of historic constructions are comparable. For the purpose of developing this tool for the architectural heritage of Palermo, this research focuses on calcarenite s…